Leofoto LS-365C Compact Carbon Fiber Tripod with PG-1 (Camouflage)
- Load Capacity: 44 lb
- Maximum Height: 60"
- Minimum Height: 3.1"
- Folded Length: 18.9"
- Arca-Type Compatible
- Swing Arm with Locking Knob
- 360° Pan with Independent Pan Lock
- 3.9" of Camera Height Adjustability
- Bubble Level on the Base
- Swing Arm 1/4"-20 Sockets
The Leofoto LS-365C Compact Carbon Fiber Tripod is a 5-section support with 10x carbon fiber tubes that make the tripod a 3.9 lb lightweight support, with a load capacity of 44 lb. The 7075 aluminum parts are CNC machined and hard anodized, making the surface tough against scratching and scuffing. The twist leg lock system is easily opened with a simple quarter turn, which enables you to extend all the sections to a maximum height of 60".
With the tripod's three variable leg angles, it allows you to splay the legs completely out, so the support can drop to a minimum height of 3.1". At the tripod's apex, the spider has been hollowed out, which adds to the relevance of the tripod's light weight. Additionally, two integrated 1/4"-20 socket are made available on the side of the spider and under it for photo or video accessories. A weight hook is included to add weight to the tripod, so you can further stabilize the support to the ground. To store or travel with the tripod, you can fold it to a length of 18.9".
Travel lightly with the 2.2 lb Leofoto PG-1 Gimbal Head, which is constructed from T6061 aluminum. Along with your lightweight tripod, this allows you to travel longer distances with your setup comfortably. The gimbal head enables you to capture fast-moving subjects with a large and heavy telephoto lens that otherwise you could not do with just hand holding the lens.
The head's arm swings back and forth and can be locked down at its required angle, and the camera platform, which is Arca-type compatible, has a height adjustability of 3.9" to help balance a telephoto lens on the head. Future setups can be repeated because of the printed scale on the side of the swing arm. Also, on the side of the arm are 1/4"-20 sockets for accessories such as an articulating arm. The 9.7" tall head can easily hold up to 55.1 lb of equipment and rotate a full 360° while keeping the horizon straight using the bubble level at the base of the head.
|UPC/EAN (Bar Code)||6940828396357|
|Model Number||LS-365C + PG-1 (Camouflage)|
|Head Type||PG-1 GImbal Head|
|Leg Lock Type||Twist Lock|
|Maximum Height||60" / 152.4 cm|
|Minimum Height||3.1" / 7.9 cm|
|Support Weight||44 lb / 19.96 kg|
|Travel Design / Reverse Folding Legs||No|
|Independent Leg Spread||Yes|
|Leg Diameter||1.42" / 36 mm|
|Feet Features||Rubber, Removable, Spiked|